Point to Point > PTP 58100 Lite - Reflector




Download Specification Sheet
Adobe PDF Format ~350Kb
Last Updated: Mar 8, 2007
To buy this product, contact your Canopy Distributor or follow this link to have someone contact you about Canopy products.
Canopy Part Number5700BHRFDD
DescriptionPTP 58100 Lite - Reflector
Market AvailabilityNorth America, South America, Asia
Signaling Rate10 Mbps
Typical LOS Range35 mi (56 km)
Typical Aggregate Useful Throughput7.5 Mbps
Frequency range of bandISM 5725-5850 MHz
Non-overlapping Channels6
Channel Width20 MHz
Modulation TypeHigh Index 2-level Frequency Shift Keying (FSK) optimized for interference rejection
Channel Spacingevery 5 MHz
EncryptionDES capable
Latency2.5 msec
Carrier to Interference ratio (C/I)~3dB @ 10 Mbps, ~10dB @ 20 Mbps at -65dBm
Nominal Receiver Sensitivity (dbm typical)-86 dB
Antenna Gain (dBi)7 dB
Reflector Gain18 dB
EIRP (dBm)48 dB
Equivalent Isotropic Radiated Power (EIRP)63 W
DC Power (typical)0.34 A @ 24 VDC = 8.2 W
Antenna Beam Width3 dB antenna beam width 6 degrees, Azimuth and Elevation
Mean Time Between Failure (MTBF)40 yr
Temperature-40° C to +55° C (-40° F to +131° F)
Wind Survival190 km/hr (118 miles/hr)
DimensionsModule: 11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D). Passive Reflector: 18 inch H x 24 in W (45 cm H x 60 cm W)
Weight.45 kg (1 lb), 3.0 kg (6.5 lbs) with passive reflector
Access MethodTime Division Duplex (TDD)
Interface10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant)
Protocols UsedIPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP
Network ManagementHTTP, TELNET, FTP, SNMP Version 2c
FCC IDABZ89FC5804
Industry Canada Certification Number109W-5700
NYCE0202CE08128


Specifications subject to change without notice.