| Canopy Part Number | 5210BHRFDD |
| Description | PTP 52100 Lite - Reflector |
| Signaling Rate | 10 Mbps |
| Typical LOS Range | 10 mi (16 km) |
| Typical Aggregate Useful Throughput | 7.5 Mbps |
| Frequency range of band | U-NII 5250-5350 MHz |
| Non-overlapping Channels | 3 |
| Channel Width | 20 MHz |
| Modulation Type | High Index 2-level Frequency Shift Keying (FSK) optimized for interference rejection |
| Channel Spacing | every 5 MHz |
| Encryption | DES capable |
| Latency | 2.5 msec |
| Carrier to Interference ratio (C/I) | ~3dB @ 10 Mbps, ~10dB @ 20 Mbps at -65dBm |
| Nominal Receiver Sensitivity (dbm typical) | -86 dB |
| Antenna Gain (dBi) | 7 dB |
| Reflector Gain | 18 dB |
| EIRP (dBm) | 30 dB |
| Equivalent Isotropic Radiated Power (EIRP) | 1.3 W |
| DC Power (typical) | 0.34 A @ 24 VDC = 8.2 W |
| Antenna Beam Width | 3 dB antenna beam width 6 degrees, Azimuth and Elevation with Reflector |
| Mean Time Between Failure (MTBF) | 40 yr |
| Temperature | -40° C to +55° C (-40° F to +131° F) |
| Wind Survival | 190 km/hr (118 miles/hr) |
| Dimensions | Module: 11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D). Passive Reflector: 18 inch H x 24 in W (45 cm H x 60 cm W) |
| Weight | .45 kg (1 lb), 3.0 kg (6.5 lbs) with passive reflector |
| Access Method | Time Division Duplex (TDD) |
| Interface | 10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant) |
| Protocols Used | IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP Version 2C |
| Network Management | HTTP, TELNET, FTP, SNMP Version 2c |
| FCC ID | ABZ89FC5807 |
| Industry Canada Certification Number | 109W-5210 |
